Tiling – The Easy Steps To Do It

tile factory outlet Tiling is a job that most people would rather not learn how to do as it can be intimidating that you make some mistakes in the process. Unlike what many think, tiling is actually easy to do. Actually, it can save you a whole lot of money instead of employing a specialist for the job. If you understand the do’s and don’ts, then this task is a no-brainer for you.

How To Choose Your Tiles

You have to pick the tiles you need to use before doing anything else. The range of choices you have may get you surprised. You can find different types of tiles and they come in various finishes, textures, colors and sizes.

Depending on your choice, choosing a tile needs a good information on them. It can also depend upon how you want the room to be as well as the over all design and feel of the room.

Dimensions & Computations

Your floor area should be measured out in the beginning. Whether you want the tiles to go under any type of fitting and units is also extremely important to take into account. Generally, it is advisable if you tile under the fittings, so that whenever you would need to move appliances in the future, like a fridge, then you do not have to lift it up over the edge of your new tiles.

When you have chosen what sort of tile you want to use, you need to do some calculations. Get your floor’s width and divide it by the width of one tile. You do that to determine the number of rows that you’ll have. Also, this can help you select the optimal wall edge to position your cut tiles against.


After doing the mathematics, now you can start tiling your floor. Making sure that you have an even coverage of glue put on your sub-floor is also extremely important. Your sub-floor or the surface you are tiling also is a factor in which adhesive to utilize. You can use a rapid setting adhesive if it is a concrete floor. Nevertheless, ensure that you don’t spread too much of the mixture at once, because it can set as quickly as 30 minutes.

You’ll need a flexible adhesive, if it’s a wooden sub-floor. It is written on the bag or the tub if the adhesive is flexible or not. When you have marble, you’ll need a white adhesive. So that no color coming from the underside would bleed and ruin your design, you should use white adhesive.


You would need to grout the floor once you completed restoring your tiles on the floor and once you’ve allowed plenty of time for it to dry. If you have natural tiles, like marble, slate, limestone, granite, travertine, and porcelain, you have to seal them first before you grout them. So they will be waterproof and may become more resistant against dirt and staining ,you have to use a specialized impregnating sealer.

Mix up the grout and apply it using a grout squeegee. Until they’re all filled, work over the joints.

To finish, wipe off the excess grout using a sponge.

Leave a Comment

{ 0 comments… add one now }

Previous post:

Next post: