Drilling Porcelain Tiles – How To Do It Right

porcelain tiles Want to understand how is drilling porcelain tiles carried out? This post will assist you by providing easy steps that are most important in your drilling process. Drilling porcelain tiles might be needed should you want to put up extra accessories in your bathroom or any room that features porcelain tiles. For illustration, by drilling the porcelain tiles, you’d be able to put bathroom shaving cabinet, a mirror, soap dish, towel rails, or maybe your skin care products holder.

To start your drilling activity, you have to first find out what kind of resources you will require to carry out the work. Take a look at the tools you’ll require:

RCD Breaker

Drill Bits of Diamond Core (Good Quality)

Masonry Drill Bits (Comes w/ quality drill bits)

Drill Bit of Carbide Pilot ( use this if you’ll drill 13-mm hole or larger holes)

Equipment for Water Cooling

Drilling Device

Safety Glasses or Goggles

These materials could be bought in various stores. You can just simply purchase these before proceeding to your drilling activity. You should make sure of the standard of the tools first to ensure the result of the drilling would be suited to your requirement.

Yet another thing you should take into consideration with drilling porcelain tiles is the hole sizes you are about to create. It is fairly important for the size or diameter of the hole determines how big the drill bit you’re going to use.

After establishing the diameter of the holes you are about to drill and preparing the instruments you’ll require for the drilling, you can start to commence drilling porcelain tiles. Be sure you wear your safety goggles to keep your eye away from particles and elimination of electric shock with RCD.

These proceeding steps will be for holes about 10mm or less in diameter with diamond cores.

1. Put an indicator in the hole’s center. Either employ a sticky tape or perhaps lead pencil.

2. Grab the right size of the diamond core bit. After that, attach it to the electric drill. Make sure that there’s a supply of water from any cooling gear is at a constant. (Water cooling equipment is important in keeping it sure that there is a constant cool temperature in the diamond core bit and will also prevent debris while you are drilling the hole. Don’t use mobile aspirator or wet sponge, for these don’t give enough coolant to the diamond core bit.)

3. Your drill should be positioned between 1000 & 1500 rpm. Preferring the marker as the marking tool, it’s suitable to use the “Leaning In” method.

*Method of Leaning In- With an angle, you’ll begin to drill. As you see the drill cuts the tile, your drill should be in horizontal position. Ensure that there is enough pressure laid and rotate the drill until the hole is completely drilled.

*Method using Sticky tape- Place sticky tape on the wall exactly where you need the hole. This’ll help to prevent the drill bit from sliding.

4. Tip- I picked up a great from www.tfo.com.au. As soon as the hole has started, don’t use too much pressure have the drill do the work.

Leave a Comment

{ 0 comments… add one now }

Previous post:

Next post: